Day # 12

We tried to test the air cannon again. It Failed! We raised it to 30 psi and the chamber just bleew off. This was probably the most exciting thing. For tomorrow, we plan to bind the research paper.

Day # 11

After testing our project, it did not work out. The pvc pipes broke apart, and we had to put the air cannon back together. We used new pieces of pvc to make the air cannon tighter for next class. All in all, we are not going to finish before March 1st.

Day # 10

Today we put the air cannon together. We used sealing tape and pvc cement to make sure the pieces are air sealed and tight. For next class, we plan to test it and try to fix any problems that we see. We also plan to finish our research paper and website.

Day # 9

Today we began our project like we planned. We placed an end cap on our chamber, and we plan to drill a hole for the air valve. To shoot it, you simply fill the chamber with air and turn the valve, which releases the compressed air.

Day # 8

Today we worked on deciding what design to use as a group. After doing the questionare for building the prototyope, our first design took the most votes. Next class, we plan to begin working on the project.

Day # 7

Today, I started to plan the webpage for our group. However, one of our group members left, which slowed down the process. For next class, I plan to have a webpage design ready to just type in the content.

Day # 6

We had come to a decison of our protorype. It will be similar to the vaccum cleaners you hang on your back. The reason why we chose this design was because it looks simple, and it looks cheaper to do.

Link: http://www.airmagicfx.com/sportsmarketing.html